For more than 30 years!
Advice, distribution, installation and service for
compressors, compressed-air conditioning, refrigeration engineering,
regenerative heat recovery and pneumatic tools
For more than 30 years!
Advice, distribution, installation and service for
Universal rotary joints up to 3500 U/min, up to 50 bar
{{ bild.Beschreibung }}
{{ bildGross.Beschreibung }}
{{ bildGross.Beschreibung }}
{{ bildGross.Beschreibung }}
Suitable:
Rotary joint for simple supply line or drainage. These rotary joints are suitable for use of non-contaminated water. Alternatively, the units can be equipped with a special seal for non-contaminated or poorly filtered water.
Materials:
Body: brass, seal: carbon graphite / carbide
Temperature range:
0 to +95 °C
Operating pressure:
max. 50 bar (G 2": max 40 bar)
Media:
Water
Optional:
Version in stainless steel -ES, seal package for abrasive media or unclean water -AB
Warning:
Maximum pressure and speed values may not occur simultaneously. If in doubt, please ask us for confirmation. A liquid pressure that exceeds 8 bar is only allowed when using with cooling water and a maximum temperature of +50°C. Not suitable for reverse operation
Advantages:
•The springs are external to the media flow in order to minimise the loss of pressure and avoid turbulence.
Warning:
Take note of left and right-handed threads: Left-handed thread for feeding into clockwise rotating drums. Right-handed thread for feeding into counter-clockwise rotating drums.