For more than 30 years!
Advice, distribution, installation and service for
compressors, compressed-air conditioning, refrigeration engineering,
regenerative heat recovery and pneumatic tools

For more than 30 years!
Advice, distribution, installation and service for

compressors, compressed-air conditioning, refrigeration engineering,
regenerative heat recovery and pneumatic tools

{{ ergebnis }}

{{ ergebnis.artikelnummer }}

({{ ergebnis.artikelbezeichnung }})

Item group

Pressure gauge profiled seals

{{ bildGross.Beschreibung }}

{{ bildGross.Beschreibung }}

{{ bildGross.Beschreibung }}

Application:

Profiled seals are often used to install pressure gauges. Compared with flat seals or sealing edge rings, they have the advantage of being able to turn one rotation more after the pressure gauge has been sealed (profiled seals made of stainless steel can turn approx. 1/2 rotation more). Therefore, it is possible to position the pressure gauge in such a way that the display can be read. When installing a pressure gauge with a plastic thread, we recommend using the extra soft aluminium gasket. In general, a profiled seal cannot be reused after being installed!

{{ $t('shop.all.dokumente') }}:

Catalogue page Atlas 9 (Page 670_n) atlas9_neutral_seiten/670_n.pdf
Documentation dokuneutral/doku_drmanocu_n.pdf

{{ $t('shop.display.artikelgruppe.mehr_informationen') }} {{ $t('shop.display.artikelgruppe.weniger_informationen') }}

Pressure gauge profiled seals:

{{ $t('shop.all.artikelgruppe_n_von_m_artikeln', { anzahlArtikelAngezeigt: anzahlArtikelAngezeigt, anzahlArtikelGesamt: anzahlArtikelGesamt} ) }}

DR 18 MANO CU

Pressure gauge profiled seal, Copper, G 1/8"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Copper	G 1/8"	4,1	8

Version

Internal centring via centring pin on the measuring device (standard)

DR 14 MANO CU

Pressure gauge profiled seal, Copper, G 1/4"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Copper	G 1/4"	5,4	9,3

Version

Internal centring via centring pin on the measuring device (standard)

DR 38 MANO CU

Pressure gauge profiled seal, Copper, G 3/8"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Copper	G 3/8"	8	14,8

Version

Internal centring via centring pin on the measuring device (standard)

DR 12 MANO CU

Pressure gauge profiled seal, Copper, G 1/2"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Copper	G 1/2"	8	14,8

Version

Internal centring via centring pin on the measuring device (standard)

DR 14 MANO A

Pressure gauge profiled seal, Aluminium, G 1/4"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Aluminium	G 1/4"	5,4	9,3

Version

Internal centring via centring pin on the measuring device (standard)

DR 14 MANO ES

Pressure gauge profiled seal, 1.4571, G 1/4"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
1.4571	G 1/4"	5,4	9,3

Version

Internal centring via centring pin on the measuring device (standard)

DR 38 MANO ES

Pressure gauge profiled seal, 1.4571, G 3/8"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
1.4571	G 3/8"	8	14,8

Version

Internal centring via centring pin on the measuring device (standard)

DR 12 MANO ES

Pressure gauge profiled seal, 1.4571, G 1/2"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
1.4571	G 1/2"	8	14,8

Version

Internal centring via centring pin on the measuring device (standard)

DR 14 MANO CUA

Pressure gauge profiled seal, Copper, G 1/4"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Copper	G 1/4"	5,5	11

Version

External centring in the screw-in hole (for measuring device thread without centring pin)

DR 12 MANO CUA

Pressure gauge profiled seal, Copper, G 1/2"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Copper	G 1/2"	11	18,2

Version

External centring in the screw-in hole (for measuring device thread without centring pin)

DR 14 MANO AA

Pressure gauge profiled seal, Aluminium, G 1/4"

Material	for threads	Inner diameter [mm]	Outer diameter [mm]
Aluminium	G 1/4"	5,5	11

Version

External centring in the screw-in hole (for measuring device thread without centring pin)

{{ $t('shop.all.unverbindliche_richtwerte') }}

Shipping on the same day

More than 99% of the orders, which are made before 6:00 p.m. in our Online Shop, are shipped on the same day.

Ordered by 9:00 p.m: Shipping on the same day

For online orders between 6:00 and 9:00 p.m. on request we ship the same day.

Technical Consulting

Our qualified employees are glad to answer your questions and requests. We are always available via telephone and email.

Re-coding service

Using the search function in our Online Shop, quickly find the right product with the item number of other supplier or manufacturer.

{{ $t('shop.all.spaetbestellservice') }}

{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}

{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}

{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.