For more than 30 years!
Advice, distribution, installation and service for
compressors, compressed-air conditioning, refrigeration engineering,
regenerative heat recovery and pneumatic tools
For more than 30 years!
Advice, distribution, installation and service for
Compressed air operated hydraulic pumps for single-acting cylinders, PN 700
{{ bild.Beschreibung }}
{{ bildGross.Beschreibung }}
{{ bildGross.Beschreibung }}
{{ bildGross.Beschreibung }}
Temperature range:
-20 to +65 °C
Connection thread, hydraulic:
NPT 3/8" (FT)
Connection thread, compressed air:
NPT 1/4" (IG) - use RN 14NPT14G MS to adapt to G 1/4".
required compressed air supply:
3 - 8 bar
Scope of delivery:
The pumps are delivered filled with HLP oil.
Note:
Since the pressure ratio between compressed air and hydraulics is approx. 1/100, it makes sense to connect a fine pressure regulator in front of the pump to limit the maximum pressure.
Advantages:
•operated with compressed air instead of by hand, •equipped with safety valve and air filter, •operated conveniently by pedal or hand pedal